Find a Service Center
Alternate Products
- 1.188 in Shaft Diameter
- 1.752 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Spring Material | Carbon Steel Garter |
| Solid | Yes |
| Pressure | 10 psi |
| Construction | CRW1 |
| Family Name | Single Lip With Spring Shaft Seal |
| Housing Bore Dia. | 1.752 in |
| Shaft Dia. | 1.188 in |
| Seal Application | General Purpose |
| Seal Width | 0.25 in |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 225 °F |
| Operating Temperature [Max] | 210 °F |
| Seal Type | Oil |
| Installation | Housing Press Fit |
| Case Design | Metal Case |
| Operating Temperature [Min] | -40 °F |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Temperature Range [Min] | -65 °F |
| Lip Style | Internal |
| Cover/Compensation Ring/Plate Required | No |
| Design | CRW1 |
| Overall Width | 0.25 in |
| Case Construction | Steel Case w/o Inner Case |
| Lip Material | Nitrile Rubber (NBR) |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Weight | 0.031 LB |
| EAN or UPC | 85311010511 |
