Find a Service Center
- 1 in Shaft Diameter
- 2 in Housing Bore Diameter
- 9 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Temperature Range [Min] | -65 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Construction | HMSA7 |
| Spring Material | Carbon Steel Garter |
| Housing Bore Dia. | 2 in, 50 mm |
| Operating Temperature [Max] | 210 °F |
| Speed | 0.05 ft/min |
| Surface Speed [Nom] | 3,600 ft/min |
| Lip Style | Internal |
| Seal Application | Light Dirt Exclusion |
| Temperature Range [Max] | 225 °F |
| Design | HMSA7 |
| Overall Width | 9 mm |
| Seal Width | 3/8 in |
| Lip Type | Dual Lip |
| Pressure | 7 psi |
| Installation | Housing Press Fit |
| Case Design | Rubber Outside Diameter |
| Case Construction | Rubber Covered Steel Case |
| Seal Design | Molded Design |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lubricant | Oil or Grease |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Shaft Dia. | 1 in, 32 mm |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Weight | 0.091 LB |
| EAN or UPC | 85311011891 |
