Find a Service Center
Alternate Products
- 1.313 in Shaft Diameter
- 2.125 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.313 in |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Design | CRW1 |
| Spring Material | Carbon Steel Garter |
| Shaft Dia. | 1.313 in |
| Case Construction | Steel Case w/o Inner Case |
| Lip Type | Single Lip |
| Surface Speed [Nom] | 1,548 ft/min |
| Seal Width | 0.313 in |
| Temperature Range [Max] | 225 °F |
| Case Design | Metal Case |
| Lip Style | Internal |
| Housing Bore Dia. | 2.125 in |
| Pressure | 10 psi |
| Family Name | Single Lip With Spring Shaft Seal |
| Temperature Range [Min] | -65 °F |
| Seal Type | Oil |
| Installation | Housing Press Fit |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Max] | 210 °F |
| Construction | CRW1 |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Min] | -40 °F |
| Seal Design | SKF Wave |
| Solid | Yes |
| Weight | 0.086 LB |
| EAN or UPC | 85311012072 |
