Find a Service Center
Alternate Products
- 1.375 in Shaft Diameter
- 2.374 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Construction | CRW1 |
| Seal Type | Oil |
| Surface Speed [Nom] | 1,621 ft/min |
| Seal Width | 0.313 in |
| Housing Bore Dia. | 2.374 in |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Temperature Range [Max] | 225 °F |
| Overall Width | 0.313 in |
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 210 °F |
| Speed | 0.07 ft/min |
| Spring Material | Carbon Steel Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Temperature Range [Min] | -65 °F |
| Lip Style | Internal |
| Inch/Metric | Inch |
| Seal Design | SKF Wave |
| Design | CRW1 |
| Seal Application | General Purpose |
| Case Design | Metal Case |
| Solid | Yes |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Shaft Dia. | 1.375 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Case Construction | Steel Case w/o Inner Case |
| Pressure | 10 psi |
| Weight | 0.094 LB |
| EAN or UPC | 85311012966 |
