Find a Service Center
Alternate Products
- 1.438 in Shaft Diameter
- 2.502 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Cover/Compensation Ring/Plate Required | No |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Bore Sealant | Bore Tite |
| Seal Width | 0.313 in |
| Solid | Yes |
| Shaft Dia. | 1.438 in |
| Case Material | Steel |
| Housing Bore Dia. | 2.502 in |
| Operating Temperature [Max] | 210 °F |
| Pressure | 10 psi |
| Case Construction | Steel Case w/o Inner Case |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Lip Type | Single Lip |
| Inch/Metric | Inch |
| Spring Type | Garter |
| Case Design | Metal Case |
| Seal Design | SKF Wave |
| Spring Material | Carbon Steel |
| Seal Type | Oil |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Style | Internal |
| Operating Temperature [Min] | -40 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Construction | CRW1 |
| Temperature Range [Max] | 225 °F |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -65 °F |
| Overall Width | 0.313 in |
| Speed | 0.07 ft/min |
| Design | CRW1 |
| Weight | 0.082 LB |
| EAN or UPC | 85311014144 |
