Find a Service Center
Alternate Products
- 1.5 in Shaft Diameter
- 1.874 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Inch/Metric | Inch |
| Operating Temperature [Max] | 210 °F |
| Seal Design | SKF Wave |
| Lip Style | Internal |
| Housing Bore Dia. | 1.874 in |
| Lip Material | Nitrile Rubber (NBR) |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Case Design | Metal Case |
| Overall Width | 0.25 in |
| Construction | CRW1 |
| Shaft Dia. | 1.5 in |
| Seal Width | 0.25 in |
| Lip Type | Single Lip |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Temperature Range [Min] | -65 °F |
| Installation | Housing Press Fit |
| Case Construction | Steel Case w/o Inner Case |
| Surface Speed [Nom] | 1,768 ft/min |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 225 °F |
| Seal Type | Oil |
| Pressure | 10 psi |
| Design | CRW1 |
| Spring Material | Carbon Steel Garter |
| Family Name | Single Lip With Spring Shaft Seal |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 0.039 LB |
| EAN or UPC | 85311014663 |
