Find a Service Center
Alternate Products
- 1.5 in Shaft Diameter
- 1.983 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Style | Internal |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Min] | -65 °F |
| Temperature Range [Max] | 225 °F |
| Seal Width | 0.313 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Type | Oil |
| Construction | CRW1 |
| Design | CRW1 |
| Seal Application | General Purpose |
| Seal Design | SKF Wave |
| Speed | 0.07 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 10 psi |
| Lubricant | Oil or Grease |
| Family Name | Single Lip With Spring Shaft Seal |
| Overall Width | 0.313 in |
| Installation | Housing Press Fit |
| Lip Type | Single Lip |
| Solid | Yes |
| Case Construction | Steel Case w/o Inner Case |
| Inch/Metric | Inch |
| Housing Bore Dia. | 1.983 in |
| Lip Material | Nitrile Rubber (NBR) |
| Surface Speed [Nom] | 1,768 ft/min |
| Case Design | Metal Case |
| Shaft Dia. | 1.5 in |
| Operating Temperature [Min] | -40 °F |
| Operating Temperature [Max] | 210 °F |
| Weight | 0.035 LB |
| EAN or UPC | 85311014724 |
