Find a Service Center
Alternate Products
- 1.5 in Shaft Diameter
- 2 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Design | Metal Case |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Inch/Metric | Inch |
| Family Name | Single Lip With Spring Shaft Seal |
| Spring Material | Carbon Steel Garter |
| Operating Temperature [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Seal Design | SKF Wave |
| Cover/Compensation Ring/Plate Required | No |
| Design | CRW1 |
| Shaft Dia. | 1.5 in |
| Operating Temperature [Max] | 210 °F |
| Surface Speed [Nom] | 1,768 ft/min |
| Case Construction | Steel Case w/o Inner Case |
| Temperature Range [Min] | -65 °F |
| Housing Bore Dia. | 2 in |
| Construction | CRW1 |
| Lip Type | Single Lip |
| Seal Type | Oil |
| Temperature Range [Max] | 225 °F |
| Pressure | 10 psi |
| Overall Width | 0.313 in |
| Speed | 0.07 ft/min |
| Seal Width | 0.313 in |
| Solid | Yes |
| Lip Material | Nitrile Rubber (NBR) |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Installation | Housing Press Fit |
| Weight | 0.079 LB |
| EAN or UPC | 85311014779 |
