Find a Service Center
- Radial Shaft Seal
- 14 mm Shaft Diameter
- 24 mm Housing Bore Diameter
- 6 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Shaft Dia. | 14 mm |
| Construction | HMSA7 |
| Cover/Compensation Ring/Plate Required | No |
| Seal Type | Grease |
| Lip Type | Dual Lip w/One Spring |
| Overall Width | 6 mm |
| Pressure | 10 psi |
| Housing Bore Dia. | 24 mm |
| Case Construction | Rubber Covered Steel Case |
| Seal Width | 6 mm |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Inch/Metric | Metric |
| Spring Material | Carbon Steel Garter |
| Seal Application | Light Dirt Exclusion |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Min] | -22 °F |
| Seal Design | Standard |
| Surface Speed [Nom] | 3,600 ft/min |
| Lip Style | Internal |
| Temperature Range [Max] | 230 °F |
| Weight | 0.061 LB |
| EAN or UPC | 85311003728 |
