Find a Service Center
Alternate Products
- 1.5 in Shaft Diameter
- 2.437 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Type | Oil |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Design | SKF Wave |
| Design | CRW1 |
| Construction | CRW1 |
| Lip Material | Nitrile Rubber (NBR) |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel Garter |
| Shaft Dia. | 1.5 in |
| Case Design | Metal Case |
| Installation | Housing Press Fit |
| Solid | Yes |
| Temperature Range [Max] | 225 °F |
| Lip Type | Single Lip |
| Seal Width | 0.313 in |
| Temperature Range [Min] | -65 °F |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Operating Temperature [Min] | -40 °F |
| Housing Bore Dia. | 2.437 in |
| Lip Style | Internal |
| Overall Width | 0.313 in |
| Weight | 0.089 LB |
| EAN or UPC | 85311015196 |
| NSN Number | 5330-01-431-9937 |
