Find a Service Center
Alternate Products
- 1.5 in Shaft Diameter
- 2.502 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 210 °F |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Inch/Metric | Inch |
| Case Construction | Steel Case w/o Inner Case |
| Bore Sealant | Bore Tite |
| Case Design | Metal Case |
| Operating Temperature [Min] | -40 °F |
| Family Name | Single Lip With Spring Shaft Seal |
| Construction | CRW1 |
| Housing Bore Dia. | 2.502 in |
| Case Material | Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Temperature Range [Min] | -65 °F |
| Spring Type | Garter |
| Seal Width | 0.313 in |
| Seal Type | Oil |
| Design | CRW1 |
| Spring Material | Carbon Steel |
| Pressure | 10 psi |
| Overall Width | 0.313 in |
| Lip Type | Single Lip |
| Seal Design | SKF Wave |
| Temperature Range [Max] | 225 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Lubricant | Oil or Grease |
| Shaft Dia. | 1.5 in |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Speed | 0.07 ft/min |
| Weight | 0.077 LB |
| EAN or UPC | 85311015264 |
