Find a Service Center
Alternate Products
- 1.563 in Shaft Diameter
- 2.437 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.313 in |
| Speed | 0.07 ft/min |
| Construction | CRW1 |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Solid | Yes |
| Family Name | Single Lip With Spring Shaft Seal |
| Spring Material | Carbon Steel Garter |
| Case Design | Metal Case |
| Housing Bore Dia. | 2.437 in |
| Design | CRW1 |
| Temperature Range [Min] | -65 °F |
| Seal Design | SKF Wave |
| Operating Temperature [Min] | -40 °F |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Inch/Metric | Inch |
| Shaft Dia. | 1.563 in |
| Operating Temperature [Max] | 210 °F |
| Cover/Compensation Ring/Plate Required | No |
| Surface Speed [Nom] | 1,843 ft/min |
| Temperature Range [Max] | 225 °F |
| Case Construction | Steel Case w/o Inner Case |
| Pressure | 10 psi |
| Lip Style | Internal |
| Installation | Housing Press Fit |
| Seal Width | 0.313 in |
| Lip Material | Nitrile Rubber (NBR) |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Weight | 0.057 LB |
| EAN or UPC | 85311015837 |
