Find a Service Center
Alternate Products
- 1.563 in Shaft Diameter
- 2.502 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Construction | Steel Case w/o Inner Case |
| Lip Style | Internal |
| Temperature Range [Max] | 225 °F |
| Temperature Range [Min] | -65 °F |
| Seal Design | SKF Wave |
| Design | CRW1 |
| Lip Type | Single Lip |
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 210 °F |
| Inch/Metric | Inch |
| Lubricant | Oil or Grease |
| Lip Material | Nitrile Rubber (NBR) |
| Construction | CRW1 |
| Seal Application | General Purpose |
| Installation | Housing Press Fit |
| Overall Width | 0.313 in |
| Seal Width | 0.313 in |
| Spring Material | Carbon Steel Garter |
| Seal Type | Oil |
| Pressure | 10 psi |
| Solid | Yes |
| Family Name | Single Lip With Spring Shaft Seal |
| Shaft Dia. | 1.563 in |
| Housing Bore Dia. | 2.502 in |
| Weight | 0.062 LB |
| EAN or UPC | 85311015875 |
