Find a Service Center
Alternate Products
- 1.619 in Shaft Diameter
- 2 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.25 in |
| Solid | Yes |
| Lip Style | Internal |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Shaft Dia. | 1.619 in |
| Seal Type | Oil |
| Case Construction | Steel Case w/o Inner Case |
| Bore Sealant | Bore Tite |
| Temperature Range [Max] | 225 °F |
| Design | CRW1 |
| Operating Temperature [Min] | -40 °F |
| Family Name | Single Lip With Spring Shaft Seal |
| Speed | 0.07 ft/min |
| Installation | Housing Press Fit |
| Case Material | Steel |
| Lip Material | Nitrile Rubber (NBR) |
| Spring Type | Garter |
| Surface Speed [Nom] | 1,916 ft/min |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Construction | CRW1 |
| Temperature Range [Min] | -65 °F |
| Spring Material | Carbon Steel |
| Inch/Metric | Inch |
| Seal Width | 0.25 in |
| Housing Bore Dia. | 2 in |
| Case Design | Metal Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Max] | 210 °F |
| Pressure | 10 psi |
| Seal Design | SKF Wave |
| Weight | 0.073 LB |
| EAN or UPC | 85311016568 |
