Find a Service Center
Alternate Products
- 1.625 in Shaft Diameter
- 2.875 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.313 in |
| Temperature Range [Max] | 225 °F |
| Bore Sealant | Bore Tite |
| Speed | 0.07 ft/min |
| Construction | CRW1 |
| Seal Design | SKF Wave |
| Lip Style | Internal |
| Spring Type | Garter |
| Spring Material | Carbon Steel |
| Operating Temperature [Max] | 210 °F |
| Pressure | 10 psi |
| Seal Width | 0.313 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Case Design | Metal Case |
| Design | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Application | General Purpose |
| Housing Bore Dia. | 2.875 in |
| Installation | Housing Press Fit |
| Case Construction | Steel Case w/o Inner Case |
| Seal Type | Oil |
| Temperature Range [Min] | -65 °F |
| Solid | Yes |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Shaft Dia. | 1.625 in |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Case Material | Steel |
| Weight | 0.104 LB |
| EAN or UPC | 85311017121 |
