Find a Service Center
Alternate Products
- 2 in Shaft Diameter
- 2.686 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Bore Sealant | Bore Tite |
| Seal Type | Oil |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | SKF Wave |
| Temperature Range [Max] | 225 °F |
| Construction | CRW1 |
| Temperature Range [Min] | -65 °F |
| Inch/Metric | Inch |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Style | Internal |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -40 °F |
| Overall Width | 0.375 in |
| Seal Width | 0.375 in |
| Spring Type | Garter |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Installation | Housing Press Fit |
| Lip Type | Single Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Design | Metal Case |
| Spring Material | Carbon Steel |
| Pressure | 10 psi |
| Operating Temperature [Max] | 210 °F |
| Design | CRW1 |
| Solid | Yes |
| Case Construction | Steel Case w/o Inner Case |
| Speed | 0.07 ft/min |
| Case Material | Steel |
| Shaft Dia. | 2 in |
| Housing Bore Dia. | 2.686 in |
| Weight | 0.091 LB |
| EAN or UPC | 85311022217 |
