Find a Service Center
Alternate Products
- 2 in Shaft Diameter
- 2.997 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.010@3000, 0.015@1000 |
| Surface Speed [Nom] | 3,600 ft/min |
| Speed | 0.07 ft/min |
| Seal Application | General Purpose |
| Construction | CRWH1 |
| Solid | Yes |
| Family Name | Single Lip With Spring Shaft Seal |
| Case Construction | Steel Case w/Inner Case |
| Seal Width | 0.375 in |
| Case Design | Metal Case, Inner Case |
| Spring Material | Carbon Steel Garter |
| Housing Bore Dia. | 2.997 in |
| Lip Style | Internal |
| Inch/Metric | Inch |
| Temperature Range [Max] | 225 °F |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Min] | -40 °F |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Lubricant | Oil or Grease |
| Seal Design | SKF Wave |
| Shaft Dia. | 2 in |
| Lip Type | Single Lip |
| Installation | Housing Press Fit |
| Pressure | 10 psi |
| Seal Type | Oil |
| Design | CRWH1 |
| Overall Width | 0.375 in |
| Weight | 0.184 LB |
| EAN or UPC | 85311022552 |
