Find a Service Center
Alternate Products
- 2 in Shaft Diameter
- 3.189 in Housing Bore
- 0.469 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Style | Internal |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Lip Material | Nitrile Rubber (NBR) |
| Spring Material | Carbon Steel Garter |
| Seal Width | 0.469 in |
| Seal Type | Oil |
| Operating Temperature [Max] | 210 °F |
| Housing Bore Dia. | 3.189 in |
| Pressure | 10 psi |
| Case Construction | Steel Case w/Inner Case |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.010@3000, 0.015@1000 |
| Family Name | Single Lip With Spring Shaft Seal |
| Shaft Dia. | 2 in |
| Case Design | Metal Case, Inner Case |
| Temperature Range [Min] | -40 °F |
| Solid | Yes |
| Seal Application | General Purpose |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Design | CRWH1 |
| Overall Width | 0.469 in |
| Construction | CRWH1 |
| Seal Design | SKF Wave |
| Temperature Range [Max] | 225 °F |
| Lip Type | Single Lip |
| Weight | 0.224 LB |
| EAN or UPC | 85311022750 |
