Find a Service Center
- 2.063 in Shaft Diameter
- 3 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Housing Bore Dia. | 3 in |
| Lip Type | Single Lip |
| Spring Material | Carbon Steel Garter |
| Operating Temperature [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Design | SKF Wave |
| Lip Style | Internal |
| Installation | Housing Press Fit |
| Seal Application | General Purpose |
| Shaft Dia. | 2.063 in |
| Design | CRW1 |
| Temperature Range [Min] | -65 °F |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Case Design | Metal Case |
| Speed | 0.07 ft/min |
| Pressure | 10 psi |
| Temperature Range [Max] | 225 °F |
| Operating Temperature [Max] | 210 °F |
| Solid | Yes |
| Overall Width | 0.375 in |
| Construction | CRW1 |
| Seal Type | Oil |
| Case Construction | Steel Case w/o Inner Case |
| Seal Width | 0.375 in |
| Lubricant | Oil or Grease |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Material | Nitrile Rubber (NBR) |
| Weight | 0.134 LB |
| EAN or UPC | 85311023313 |
| NSN Number | 5330-01-387-0555 |
