Find a Service Center
Alternate Products
- 2.313 in Shaft Diameter
- 3.251 in Housing Bore
- 0.438 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Design | SKF Wave |
| Spring Material | Carbon Steel |
| Case Material | Steel |
| Construction | CRWH1 |
| Housing Bore Dia. | 3.251 in |
| Speed | 0.07 ft/min |
| Bore Sealant | Bore Tite |
| Spring Type | Garter |
| Temperature Range [Max] | 225 °F |
| Temperature Range [Min] | -40 °F |
| Installation | Housing Press Fit |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Pressure | 10 psi |
| Seal Type | Oil |
| Lip Material | Nitrile Rubber (NBR) |
| Cover/Compensation Ring/Plate Required | No |
| Seal Width | 0.438 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.010@3000, 0.015@1000 |
| Overall Width | 0.438 in |
| Case Construction | Steel Case w/Inner Case |
| Design | CRWH1 |
| Operating Temperature [Max] | 210 °F |
| Inch/Metric | Inch |
| Surface Speed [Nom] | 3,600 ft/min |
| Case Design | Metal Case, Inner Case |
| Shaft Dia. | 2.313 in |
| Lip Style | Internal |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Weight | 0.141 LB |
| EAN or UPC | 85311025546 |
| NSN Number | 5330-00-584-2060 |
