Find a Service Center
Alternate Products
- 0.25 in Shaft Diameter
- 0.749 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Housing Bore Dia. | 0.749 in |
| Shaft Dia. | 0.25 in |
| Speed | 0.07 ft/min |
| Pressure | 10 psi |
| Case Material | Stainless Steel |
| Seal Width | 0.25 in |
| Overall Width | 0.25 in |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Operating Temperature [Max] | 210 °F |
| Bore Sealant | Bore Tite |
| Operating Temperature [Min] | -40 °F |
| Solid | Yes |
| Seal Type | Oil |
| Spring Type | Garter |
| Lip Material | Nitrile Rubber (NBR) |
| Case Construction | Stainless Steel Case w/o Inner Case |
| Seal Design | SKF Wave |
| Cover/Compensation Ring/Plate Required | No |
| Family Name | Single Lip With Spring Shaft Seal |
| Installation | Housing Press Fit |
| Lip Style | Internal |
| Case Design | Metal Case |
| Construction | CRW1 |
| Design | CRW1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Type | Single Lip |
| Spring Material | Stainless Steel |
| Seal Application | General Purpose |
| Weight | 0.043 LB |
| EAN or UPC | 85311174473 |
