Find a Service Center
Alternate Products
- 0.375 in Shaft Diameter
- 0.875 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Construction | Steel Case w/o Inner Case |
| Inch/Metric | Inch |
| Shaft Dia. | 0.375 in |
| Construction | CRW1 |
| Design | CRW1 |
| Solid | Yes |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Type | Oil |
| Spring Type | Garter |
| Speed | 0.07 ft/min |
| Bore Sealant | Bore Tite |
| Seal Design | SKF Wave |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Overall Width | 0.25 in |
| Case Material | Steel |
| Seal Width | 0.25 in |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Case Design | Metal Case |
| Lip Style | Internal |
| Spring Material | Carbon Steel |
| Housing Bore Dia. | 0.875 in |
| Pressure | 10 psi |
| Lubricant | Oil or Grease |
| Temperature Range [Min] | -65 °F |
| Temperature Range [Max] | 225 °F |
| Lip Type | Single Lip |
| Operating Temperature [Max] | 210 °F |
| Weight | 0.062 LB |
| EAN or UPC | 85311002769 |
