Find a Service Center
Alternate Products
- 4.5 in Shaft Diameter
- 5.501 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Design | CRW1 |
| Installation | Housing Press Fit |
| Inch/Metric | Inch |
| Case Construction | Steel Case w/o Inner Case |
| Lip Material | Nitrile Rubber (NBR) |
| Solid | Yes |
| Temperature Range [Max] | 225 °F |
| Case Design | Metal Case |
| Seal Design | SKF Wave |
| Shaft Dia. | 4.5 in |
| Case Material | Steel |
| Construction | CRW1 |
| Pressure | 10 psi |
| Temperature Range [Min] | -65 °F |
| Operating Temperature [Max] | 210 °F |
| Operating Temperature [Min] | -40 °F |
| Lip Style | Internal |
| Seal Type | Oil |
| Cover/Compensation Ring/Plate Required | No |
| Seal Width | 0.375 in |
| Overall Width | 0.375 in |
| Lip Type | Single Lip |
| Bore Sealant | Bore Tite |
| Spring Type | Garter |
| Seal Application | General Purpose |
| Lubricant | Oil or Grease |
| Speed | 0.07 ft/min |
| Housing Bore Dia. | 5.501 in |
| Spring Material | Carbon Steel |
| Weight | 0.258 LB |
| EAN or UPC | 85311035897 |
| NSN Number | 5330-00-435-8499 |
