Find a Service Center
Alternate Products
- 4.875 in Shaft Diameter
- 6.001 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Max] | 225 °F |
| Seal Width | 0.5 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Shaft Dia. | 4.875 in |
| Lip Style | Internal |
| Case Construction | Steel Case w/Inner Case |
| Lubricant | Oil or Grease |
| Pressure | 10 psi |
| Temperature Range [Min] | -40 °F |
| Spring Material | Carbon Steel Garter |
| Seal Type | Oil |
| Case Design | Metal Case, Inner Case |
| Lip Type | Single Lip |
| Speed | 0.07 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Design | CRWH1 |
| Surface Speed [Nom] | 3,600 ft/min |
| Solid | Yes |
| Housing Bore Dia. | 6.001 in |
| Installation | Housing Press Fit |
| Lip Material | Nitrile Rubber (NBR) |
| Construction | CRWH1 |
| Seal Application | General Purpose |
| Overall Width | 0.5 in |
| Operating Temperature [Max] | 210 °F |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Design | SKF Wave |
| Inch/Metric | Inch |
| Weight | 0.488 LB |
| EAN or UPC | 85311037013 |
