Find a Service Center
Alternate Products
- 0.5 in Shaft Diameter
- 0.875 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Design | SKF Wave |
| Overall Width | 0.25 in |
| Speed | 0.07 ft/min |
| Lubricant | Oil or Grease |
| Shaft Dia. | 0.5 in |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Application | General Purpose |
| Housing Bore Dia. | 0.875 in |
| Construction | CRW1 |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -65 °F |
| Lip Style | Internal |
| Spring Material | Carbon Steel |
| Design | CRW1 |
| Seal Width | 0.25 in |
| Bore Sealant | Bore Tite |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Inch/Metric | Inch |
| Family Name | Single Lip With Spring Shaft Seal |
| Cover/Compensation Ring/Plate Required | No |
| Seal Type | Oil |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Max] | 210 °F |
| Pressure | 10 psi |
| Solid | Yes |
| Lip Type | Single Lip |
| Case Design | Metal Case |
| Case Material | Steel |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Max] | 225 °F |
| Spring Type | Garter |
| Weight | 0.042 LB |
| EAN or UPC | 85311003315 |
