Find a Service Center
Alternate Products
- 0.5 in Shaft Diameter
- 0.999 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Housing Bore Dia. | 0.999 in |
| Temperature Range [Max] | 225 °F |
| Case Design | Metal Case |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel |
| Speed | 0.07 ft/min |
| Temperature Range [Min] | -65 °F |
| Seal Design | SKF Wave |
| Solid | Yes |
| Lip Material | Nitrile Rubber (NBR) |
| Construction | CRW1 |
| Design | CRW1 |
| Surface Speed [Nom] | 590 ft/min |
| Bore Sealant | Bore Tite |
| Shaft Dia. | 0.5 in |
| Cover/Compensation Ring/Plate Required | No |
| Seal Type | Oil |
| Case Construction | Steel Case w/o Inner Case |
| Overall Width | 0.25 in |
| Lip Type | Single Lip |
| Pressure | 10 psi |
| Spring Type | Garter |
| Operating Temperature [Max] | 210 °F |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -40 °F |
| Case Material | Steel |
| Inch/Metric | Inch |
| Installation | Housing Press Fit |
| Seal Width | 0.25 in |
| Weight | 0.043 LB |
| EAN or UPC | 85311003414 |
