Find a Service Center
Alternate Products
- 5 in Shaft Diameter
- 6.25 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Application | General Purpose |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Operating Temperature [Max] | 210 °F |
| Lip Style | Internal |
| Pressure | 10 psi |
| Inch/Metric | Inch |
| Temperature Range [Max] | 225 °F |
| Temperature Range [Min] | -40 °F |
| Speed | 0.07 ft/min |
| Case Design | Metal Case, Inner Case |
| Overall Width | 0.5 in |
| Operating Temperature [Min] | -40 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Family Name | Single Lip With Spring Shaft Seal |
| Housing Bore Dia. | 6.25 in |
| Construction | CRWH1 |
| Spring Material | Carbon Steel Garter |
| Seal Width | 0.5 in |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Shaft Dia. | 5 in |
| Lip Material | Nitrile Rubber (NBR) |
| Solid | Yes |
| Installation | Housing Press Fit |
| Design | CRWH1 |
| Case Construction | Steel Case w/Inner Case |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Lubricant | Oil or Grease |
| Weight | 0.51 LB |
| EAN or UPC | 85311037334 |
