Find a Service Center
Alternate Products
- 5.25 in Shaft Diameter
- 6.25 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Design | Metal Case, Inner Case |
| Pressure | 10 psi |
| Shaft Dia. | 5.25 in |
| Bore Sealant | Bore Tite |
| Temperature Range [Min] | -40 °F |
| Seal Application | General Purpose |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Max] | 225 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Design | SKF Wave |
| Case Material | Steel |
| Spring Type | Garter |
| Installation | Housing Press Fit |
| Overall Width | 0.5 in |
| Design | CRWH1 |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Solid | Yes |
| Case Construction | Steel Case w/Inner Case |
| Spring Material | Carbon Steel |
| Seal Type | Oil |
| Lip Style | Internal |
| Operating Temperature [Min] | -40 °F |
| Housing Bore Dia. | 6.25 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Material | Nitrile Rubber (NBR) |
| Construction | CRWH1 |
| Seal Width | 0.5 in |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Weight | 2.07 LB |
| EAN or UPC | 85311037778 |
