Find a Service Center
Alternate Products
- 5.25 in Shaft Diameter
- 6.5 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.5 in |
| Case Design | Metal Case, Inner Case |
| Lip Type | Single Lip |
| Construction | CRWH1 |
| Speed | 0.07 ft/min |
| Design | CRWH1 |
| Temperature Range [Max] | 225 °F |
| Lip Style | Internal |
| Surface Speed [Nom] | 3,600 ft/min |
| Inch/Metric | Inch |
| Pressure | 10 psi |
| Family Name | Single Lip With Spring Shaft Seal |
| Operating Temperature [Max] | 210 °F |
| Housing Bore Dia. | 6.5 in |
| Case Construction | Steel Case w/Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Design | SKF Wave |
| Shaft Dia. | 5.25 in |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Installation | Housing Press Fit |
| Lubricant | Oil or Grease |
| Solid | Yes |
| Seal Width | 0.5 in |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Min] | -40 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Min] | -40 °F |
| Weight | 0.468 LB |
| EAN or UPC | 85311037822 |
| NSN Number | 5330-00-640-9140 |
