Find a Service Center
Alternate Products
- 5.5 in Shaft Diameter
- 6.5 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Spring Material | Carbon Steel |
| Temperature Range [Max] | 225 °F |
| Seal Application | General Purpose |
| Design | CRWH1 |
| Housing Bore Dia. | 6.5 in |
| Surface Speed [Nom] | 3,600 ft/min |
| Seal Width | 0.5 in |
| Installation | Housing Press Fit |
| Overall Width | 0.5 in |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Max] | 210 °F |
| Case Material | Steel |
| Operating Temperature [Min] | -40 °F |
| Construction | CRWH1 |
| Spring Type | Garter |
| Seal Design | SKF Wave |
| Bore Sealant | Bore Tite |
| Speed | 0.07 ft/min |
| Case Design | Metal Case, Inner Case |
| Seal Type | Oil |
| Lubricant | Oil or Grease |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Shaft Dia. | 5.5 in |
| Inch/Metric | Inch |
| Solid | Yes |
| Pressure | 10 psi |
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Min] | -40 °F |
| Lip Type | Single Lip |
| Family Name | Single Lip With Spring Shaft Seal |
| Weight | 0.473 LB |
| EAN or UPC | 85311038096 |
| NSN Number | 5330-00-920-6811 |
