Find a Service Center
Alternate Products
- 5.5 in Shaft Diameter
- 6.75 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Installation | Housing Press Fit |
| Bore Sealant | Bore Tite |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -40 °F |
| Seal Width | 0.5 in |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 6.75 in |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel |
| Spring Type | Garter |
| Case Material | Steel |
| Construction | CRWH1 |
| Lip Material | Nitrile Rubber (NBR) |
| Case Construction | Steel Case w/Inner Case |
| Seal Type | Oil |
| Design | CRWH1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Overall Width | 0.5 in |
| Shaft Dia. | 5.5 in |
| Pressure | 10 psi |
| Seal Design | SKF Wave |
| Speed | 0.07 ft/min |
| Solid | Yes |
| Lip Style | Internal |
| Inch/Metric | Inch |
| Temperature Range [Max] | 225 °F |
| Case Design | Metal Case, Inner Case |
| Weight | 0.586 LB |
| EAN or UPC | 85311038171 |
