Find a Service Center
Alternate Products
- 6.5 in Shaft Diameter
- 7.5 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Nitrile Rubber (NBR) |
| Construction | CRWH1 |
| Spring Type | Garter |
| Temperature Range [Max] | 225 °F |
| Case Material | Steel |
| Lip Style | Internal |
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 210 °F |
| Seal Design | SKF Wave |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Type | Single Lip |
| Case Design | Metal Case, Inner Case |
| Installation | Housing Press Fit |
| Shaft Dia. | 6.5 in |
| Case Construction | Steel Case w/Inner Case |
| Operating Temperature [Min] | -40 °F |
| Seal Type | Oil |
| Seal Width | 0.5 in |
| Housing Bore Dia. | 7.5 in |
| Temperature Range [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Inch/Metric | Inch |
| Overall Width | 0.5 in |
| Design | CRWH1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel |
| Weight | 2.6 LB |
| EAN or UPC | 85311039215 |
| NSN Number | 5330-01-118-0316 |
