Find a Service Center
Alternate Products
- 0.75 in Shaft Diameter
- 1.124 in Housing Bore
- 0.188 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Application | General Purpose |
| Surface Speed [Nom] | 884 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Spring Material | Carbon Steel Garter |
| Lip Material | Nitrile Rubber (NBR) |
| Inch/Metric | Inch |
| Lubricant | Oil or Grease |
| Seal Width | 0.188 in |
| Design | CRW1 |
| Seal Type | Oil |
| Lip Type | Single Lip |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Installation | Housing Press Fit |
| Construction | CRW1 |
| Temperature Range [Min] | -65 °F |
| Operating Temperature [Max] | 210 °F |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case |
| Overall Width | 0.188 in |
| Solid | Yes |
| Temperature Range [Max] | 225 °F |
| Lip Style | Internal |
| Housing Bore Dia. | 1.124 in |
| Seal Design | SKF Wave |
| Shaft Dia. | 0.75 in |
| Case Construction | Steel Case w/o Inner Case |
| Speed | 0.07 ft/min |
| Family Name | Single Lip With Spring Shaft Seal |
| Weight | 0.049 LB |
| EAN or UPC | 85311005517 |
