Find a Service Center
Alternate Products
- 0.75 in Shaft Diameter
- 1.312 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Shaft Dia. | 0.75 in |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Min] | -65 °F |
| Overall Width | 0.25 in |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Design | CRW1 |
| Speed | 0.07 ft/min |
| Pressure | 10 psi |
| Temperature Range [Max] | 225 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Design | Metal Case |
| Inch/Metric | Inch |
| Construction | CRW1 |
| Family Name | Single Lip With Spring Shaft Seal |
| Operating Temperature [Max] | 210 °F |
| Seal Width | 0.25 in |
| Solid | Yes |
| Lubricant | Oil or Grease |
| Installation | Housing Press Fit |
| Seal Design | SKF Wave |
| Case Construction | Steel Case w/o Inner Case |
| Lip Type | Single Lip |
| Housing Bore Dia. | 1.312 in |
| Seal Type | Oil |
| Weight | 0.068 LB |
| EAN or UPC | 85311005692 |
