Find a Service Center
Alternate Products
- 0.75 in Shaft Diameter
- 1.375 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Overall Width | 0.25 in |
| Cover/Compensation Ring/Plate Required | No |
| Spring Material | Carbon Steel Garter |
| Seal Design | SKF Wave |
| Case Construction | Steel Case w/o Inner Case |
| Lubricant | Oil or Grease |
| Seal Type | Oil |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Min] | -40 °F |
| Seal Application | General Purpose |
| Pressure | 10 psi |
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 210 °F |
| Lip Style | Internal |
| Design | CRW1 |
| Inch/Metric | Inch |
| Shaft Dia. | 0.75 in |
| Lip Type | Single Lip |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -65 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Housing Bore Dia. | 1.375 in |
| Seal Width | 0.25 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Construction | CRW1 |
| Case Design | Metal Case |
| Solid | Yes |
| Temperature Range [Max] | 225 °F |
| Weight | 0.027 LB |
| EAN or UPC | 85311005753 |
