Find a Service Center
- 0.75 in Shaft Diameter
- 1.499 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 884 ft/min |
| Design | CRW1 |
| Overall Width | 0.25 in |
| Seal Width | 0.25 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Spring Material | Carbon Steel |
| Spring Type | Garter |
| Temperature Range [Min] | -65 °F |
| Seal Type | Oil |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Speed | 0.07 ft/min |
| Housing Bore Dia. | 1.499 in |
| Lip Type | Single Lip |
| Installation | Housing Press Fit |
| Temperature Range [Max] | 225 °F |
| Solid | Yes |
| Lip Material | Nitrile Rubber (NBR) |
| Construction | CRW1 |
| Shaft Dia. | 0.75 in |
| Case Design | Metal Case |
| Operating Temperature [Max] | 210 °F |
| Seal Application | General Purpose |
| Case Material | Steel |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 10 psi |
| Inch/Metric | Inch |
| Seal Design | SKF Wave |
| Case Construction | Steel Case w/o Inner Case |
| Weight | 0.027 LB |
| EAN or UPC | 85311005876 |
