Find a Service Center
Alternate Products
- 0.813 in Shaft Diameter
- 1.25 in Housing Bore
- 0.188 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Max] | 225 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Housing Bore Dia. | 1.25 in |
| Construction | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Speed | 0.07 ft/min |
| Spring Material | Carbon Steel Garter |
| Solid | Yes |
| Lubricant | Oil or Grease |
| Case Design | Metal Case |
| Operating Temperature [Min] | -40 °F |
| Pressure | 10 psi |
| Installation | Housing Press Fit |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Application | General Purpose |
| Overall Width | 0.188 in |
| Seal Type | Oil |
| Lip Style | Internal |
| Lip Type | Single Lip |
| Surface Speed [Nom] | 959 ft/min |
| Seal Width | 0.188 in |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Min] | -65 °F |
| Case Construction | Steel Case w/o Inner Case |
| Inch/Metric | Inch |
| Design | CRW1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Shaft Dia. | 0.813 in |
| Weight | 0.029 LB |
| EAN or UPC | 85311006316 |
