Find a Service Center
Alternate Products
- 0.813 in Shaft Diameter
- 1.375 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Max] | 210 °F |
| Shaft Dia. | 0.813 in |
| Solid | Yes |
| Lip Material | Nitrile Rubber (NBR) |
| Speed | 0.07 ft/min |
| Temperature Range [Min] | -65 °F |
| Pressure | 10 psi |
| Seal Design | SKF Wave |
| Inch/Metric | Inch |
| Overall Width | 0.375 in |
| Seal Application | General Purpose |
| Construction | CRW1 |
| Case Design | Metal Case |
| Seal Width | 0.375 in |
| Installation | Housing Press Fit |
| Cover/Compensation Ring/Plate Required | No |
| Family Name | Single Lip With Spring Shaft Seal |
| Temperature Range [Max] | 225 °F |
| Design | CRW1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Seal Type | Oil |
| Housing Bore Dia. | 1.375 in |
| Lip Style | Internal |
| Surface Speed [Nom] | 959 ft/min |
| Operating Temperature [Min] | -40 °F |
| Spring Material | Carbon Steel Garter |
| Case Construction | Steel Case w/o Inner Case |
| Weight | 0.031 LB |
| EAN or UPC | 85311006354 |
