Find a Service Center
Alternate Products
- 0.938 in Shaft Diameter
- 1.5 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Inch/Metric | Inch |
| Overall Width | 0.25 in |
| Temperature Range [Min] | -65 °F |
| Seal Width | 1.5 in |
| Speed | 0.07 ft/min |
| Operating Temperature [Min] | -40 °F |
| Pressure | 10 psi |
| Case Design | Metal Case |
| Design | CRW1 |
| Seal Application | General Purpose |
| Installation | Housing Press Fit |
| Lip Type | Single Lip |
| Case Material | Steel |
| Seal Type | Oil |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel |
| Seal Design | SKF Wave |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Style | Internal |
| Shaft Dia. | 0.938 in |
| Cover/Compensation Ring/Plate Required | No |
| Construction | CRW1 |
| Lubricant | Oil or Grease |
| Temperature Range [Max] | 225 °F |
| Housing Bore Dia. | 1.5 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Solid | Yes |
| Bore Sealant | Bore Tite |
| Spring Type | Garter |
| Family Name | Single Lip With Spring Shaft Seal |
| Weight | 0.071 LB |
| EAN or UPC | 85311007245 |
