Find a Service Center
Alternate Products
- 25 mm Shaft Diameter
- 38.07 mm Housing Bore
- 6.35 mm Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Style | Internal |
| Design | CRW1 |
| Construction | CRW1 |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Temperature Range [Max] | 400 °F |
| Operating Temperature [Min] | -5 °F |
| Bore Sealant | Bore Tite |
| Case Material | Stainless Steel |
| Lubricant | Oil or Grease |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Operating Temperature [Max] | 390 °F |
| Family Name | Single Lip With Spring Shaft Seal |
| Speed | 0.07 ft/min |
| Housing Bore Dia. | 38.07 mm |
| Overall Width | 6.35 mm |
| Spring Material | Stainless Steel |
| Seal Width | 0.25 in |
| Spring Type | Garter |
| Case Design | Metal Case |
| Installation | Housing Press Fit |
| Surface Speed [Nom] | 1,160 ft/min |
| Pressure | 10 psi |
| Inch/Metric | Metric |
| Case Construction | Stainless Steel Case w/o Inner Case |
| Seal Application | General Purpose |
| Solid | Solid |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Design | SKF Wave |
| Seal Type | Oil |
| Shaft Dia. | 25 mm |
| Weight | 0.048 LB |
| EAN or UPC | 85311007597 |
