Find a Service Center
- 1 in Shaft Diameter
- 1.437 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Width | 0.25 in |
| Case Construction | Steel Case w/o Inner Case |
| Lip Style | Internal |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Max] | 210 °F |
| Inch/Metric | Inch |
| Construction | CRW1 |
| Case Design | Metal Case |
| Spring Material | Carbon Steel Garter |
| Lip Type | Single Lip |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Min] | -65 °F |
| Surface Speed [Nom] | 1,179 ft/min |
| Operating Temperature [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Design | CRW1 |
| Seal Design | SKF Wave |
| Shaft Dia. | 1 in |
| Overall Width | 0.25 in |
| Temperature Range [Max] | 225 °F |
| Solid | Yes |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Speed | 0.07 ft/min |
| Installation | Housing Press Fit |
| Pressure | 10 psi |
| Housing Bore Dia. | 1.437 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Weight | 0.067 LB |
| EAN or UPC | 85311008020 |
