Find a Service Center
Alternate Products
- 1 in Shaft Diameter
- 1.561 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Type | Oil |
| Lubricant | Oil or Grease |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Design | SKF Wave |
| Housing Bore Dia. | 1.561 in |
| Overall Width | 0.25 in |
| Cover/Compensation Ring/Plate Required | No |
| Seal Width | 0.25 in |
| Pressure | 10 psi |
| Speed | 0.07 ft/min |
| Seal Application | General Purpose |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Min] | -65 °F |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Installation | Housing Press Fit |
| Construction | CRW1 |
| Temperature Range [Max] | 225 °F |
| Lip Style | Internal |
| Design | CRW1 |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel Garter |
| Shaft Dia. | 1 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Type | Single Lip |
| Surface Speed [Nom] | 1,179 ft/min |
| Solid | Yes |
| Case Design | Metal Case |
| Weight | 0.073 LB |
| EAN or UPC | 85311008266 |
