MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Lubricant
Oil Preservative
Rows of Balls
Single
Precision Level
Standard (ABEC 1)
Limiting Speed - Grease
4600 rpm
Rolling Element
Ball
Width
0.94 in, 24 mm
Seal Material
None
Bearing Class
Class 6 / P6
Temperature Range [Max]
450 °F
Flush Ground
Yes
I.D.
2.76 in, 70 mm
No. of Rows
Single
O.D.
4.92 in, 125 mm
Seal Type
Unsealed
Internal Design
Universal Mounting
Enclosure
Open
Cage Type
Metal
Ring Type
Solid Inner Ring and Solid Outer Ring
Static Load Rating
60 kN
Bearing Type
Unmounted, Angular Contact
Inch/Metric
Metric
Precision Rating
ABEC 3
No. in Set
Single Bearing
Static Load Rating [Max]
12400 lbf
Origin
Single Row Angular Contact
Contact Angle
40 Degree
Locking Device
No Locking Device
Row Type
1
Duplex Type
Single
Series
7200PJ
Radial Internal Clearance
Normal
icNumber
7695856
Fillet Radius
1.5 mm
Precision
Standard
Ball Material
Steel
Inner Ring Width
0.94 in, 24 mm
Material
Bearing Steel
O.D. Type
Cylindrical
Dynamic Load Rating
71.5 kN
Limiting Speed - Oil
6000 rpm
Bore Type
Cylindrical
No. of Bearings
1
Radial Internal Clearance Specification
Normal Clearance
Snap Ring
No Snap Ring
Cage
Sheet Metal
Outer Ring Width
0.94 in, 24 mm
Capacity
Standard Capacity
Element Material
Bearing Steel
Preload Level
Light
Cage Material
Brass
Weight
2.683 LB
EAN or UPC
97741016711
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
