Find a Service Center
Alternate Products
MRC Bearing Service
7214PJDU
Single Row Cylindrical Bore Angular Contact Ball Bearing
Item #102160372
- 2.756 in Inner Diameter
- 4.921 in Outer Diameter
- Single Row
- 0.945 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
features
- 40 degree contact angle for heavy thrust load capacity
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
| I.D. | 70 mm |
| O.D. Type | Straight |
| Rolling Element Material | Steel |
| Contact Angle | 40° |
| Inner Ring Width | 24 mm |
| Closure Type | Open |
| Seal Type | Unsealed |
| Radial Internal Clearance | C3 |
| Fillet Radius Cone | 0.059 in, 1.5 mm |
| Capacity | Standard Capacity |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Precision Level | Standard (ABEC 1) |
| Precision Class | ISO P0 |
| Precision | Standard |
| Seal Material | None |
| Filling Slot | No |
| Locking Device | No Locking Device |
| Cage Material | Brass/Bronze |
| Ball Material | Steel |
| Bore Type | Round Bore |
| No. of Rows | 1 |
| Rolling Element | Ball |
| Enclosure | Open |
| Fillet Radius | 0.059 in |
| Origin | Single Row Angular Contact |
| Material | Steel |
| Cage Type | Metal |
| icNumber | 7695856 |
| Static Load Rating [Max] | 12900 lbf |
| Rows of Balls | Single |
| O.D. | 125 mm |
| Lubricant | Oil Preservative |
| Overall Width | 0.945 in, 24 mm |
| Relubricatable | No |
| Internal Design | Universal Mounting |
| Inch/Metric | Metric Bore |
| Outer Ring Width | 24 mm |
| Universally (Flush) Ground | Yes |
| Snap Ring | No Snap Ring |
| Bearing Material | Steel |
| Dynamic Load Rating | 17600 lbf |
| No. in Set | Single Bearing |
| Bearing Type | Angular Contact |
| Preload Level | None |
| Weight | 2.66 LB |
| EAN or UPC | 87796068346 |
