Skip to content Skip to navigation menu
Single Row Cylindrical Bore Angular Contact Ball Bearing

7215PJDU

Single Row Cylindrical Bore Angular Contact Ball Bearing
Item #101169044
Single Row Cylindrical Bore Angular Contact Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options

features

  • MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
  • 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
  • 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
  • ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
  • 7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Series 7200PJ
Limiting Speed - Grease 4300 rpm
Preload Level Light
Inch/Metric Metric
I.D. 2.95 in, 75 mm
Ball Material Steel
Fillet Radius 1.5 mm
Bearing Type Unmounted, Angular Contact
Flush Ground Yes
Precision Level Standard (ABEC 1)
Static Load Rating 64 kN
Rows of Balls Single
Bearing Class Class 6 / P6
Precision Rating ABEC 3
icNumber 7695987
Bore Type Cylindrical
Element Material Bearing Steel
Inner Ring Width 0.98 in, 25 mm
Contact Angle 40 Degree
Snap Ring No Snap Ring
Rolling Element Ball
Enclosure Open
Cage Type Metal
Material Bearing Steel
No. of Bearings 1
No. in Set Single Bearing
Outer Ring Width 0.98 in, 25 mm
Radial Internal Clearance Specification Normal Clearance
Seal Material None
Row Type 1
Duplex Type Single
Internal Design Universal Mounting
Temperature Range [Max] 450 °F
Cage Sheet Metal
Capacity Standard Capacity
No. of Rows Single
Seal Type Unsealed
Origin Single Row Angular Contact
Static Load Rating [Max] 15600 lbf
O.D. Type Cylindrical
Locking Device No Locking Device
O.D. 5.12 in, 130 mm
Ring Type Solid Inner Ring and Solid Outer Ring
Dynamic Load Rating 72.8 kN
Lubricant Oil Preservative
Width 0.98 in, 25 mm
Precision Standard
Radial Internal Clearance Normal
Limiting Speed - Oil 5600 rpm
Cage Material Bearing Steel
Weight 2.866 LB
EAN or UPC 97741016773
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison