Find a Service Center
Alternate Products
MRC Bearing Service
7215PJDU
Single Row Cylindrical Bore Angular Contact Ball Bearing
Item #101169044
- 2.953 in Inner Diameter
- 5.118 in Outer Diameter
- Single Row
- 0.984 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
features
- 40 degree contact angle for heavy thrust load capacity
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
| Ball Material | Steel |
| Universally (Flush) Ground | Yes |
| I.D. | 75 mm |
| O.D. Type | Straight |
| Origin | Single Row Angular Contact |
| Precision | Standard |
| Enclosure | Open |
| Locking Device | No Locking Device |
| Cage Type | Metal |
| Cage Material | Brass/Bronze |
| No. of Rows | 1 |
| Precision Class | ISO P0 |
| Overall Width | 0.984 in, 25 mm |
| Rolling Element | Ball |
| O.D. | 130 mm |
| Inch/Metric | Metric Bore |
| Capacity | Standard Capacity |
| No. in Set | Single Bearing |
| Rolling Element Material | Steel |
| Contact Angle | 40° |
| Lubricant | Oil Preservative |
| Preload Level | None |
| Radial Internal Clearance | C3 |
| Rows of Balls | Single |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Outer Ring Width | 25 mm |
| Seal Type | Unsealed |
| Internal Design | Universal Mounting |
| Bearing Type | Angular Contact |
| Closure Type | Open |
| icNumber | 7695987 |
| Inner Ring Width | 25 mm |
| Fillet Radius Cone | 0.059 in, 1.5 mm |
| Dynamic Load Rating | 17600 lbf |
| Static Load Rating [Max] | 13200 lbf |
| Material | Steel |
| Seal Material | None |
| Bearing Material | Steel |
| Bore Type | Round Bore |
| Filling Slot | No |
| Fillet Radius | 0.059 in |
| Snap Ring | No Snap Ring |
| Relubricatable | No |
| Weight | 2.8 LB |
| EAN or UPC | 87796068377 |
