MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Precision Level
Standard (ABEC 1)
icNumber
7695858
Precision
Standard
Static Load Rating [Max]
26500 lbf
Rolling Element
Ball
Material
Bearing Steel
Flush Ground
Yes
O.D.
6.3 in, 160 mm
Rows of Balls
Single
Inch/Metric
Metric
Lubricant
Oil Preservative
Locking Device
No Locking Device
Bearing Type
Unmounted, Angular Contact
Enclosure
Open
Contact Angle
40 Degree
Bearing Class
Class 6 / P6
Width
1.18 in, 30 mm
Cage Material
Brass
Element Material
Bearing Steel
Limiting Speed - Oil
4700 rpm
Preload Level
Light
Cage Type
Metal
Capacity
Standard Capacity
Cage
Sheet Metal
Ball Material
Steel
No. in Set
Single Bearing
Limiting Speed - Grease
3600 rpm
Static Load Rating
96.5 kN
Ring Type
Solid Inner Ring and Solid Outer Ring
Internal Design
Universal Mounting
O.D. Type
Cylindrical
Series
7200PJ
I.D.
3.54 in, 90 mm
Bore Type
Cylindrical
Fillet Radius
2 mm
Snap Ring
No Snap Ring
Seal Material
None
Inner Ring Width
1.18 in, 30 mm
No. of Bearings
1
Row Type
1
No. of Rows
Single
Precision Rating
ABEC 3
Outer Ring Width
1.18 in, 30 mm
Dynamic Load Rating
108 kN
Radial Internal Clearance
Normal
Radial Internal Clearance Specification
Normal Clearance
Seal Type
Unsealed
Duplex Type
Single
Origin
Single Row Angular Contact
Temperature Range [Max]
450 °F
Weight
5.395 LB
EAN or UPC
97741016919
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
