Find a Service Center
Alternate Products
MRC Bearing Service
7218PJDU
Single Row Cylindrical Bore Angular Contact Ball Bearing
Item #102142746
- 3.543 in Inner Diameter
- 6.299 in Outer Diameter
- Single Row
- 1.181 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
features
- 40 degree contact angle for heavy thrust load capacity
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
| Bearing Type | Angular Contact |
| Cage Material | Brass/Bronze |
| Enclosure | Open |
| Inch/Metric | Metric Bore |
| No. of Rows | 1 |
| Lubricant | Oil Preservative |
| Locking Device | No Locking Device |
| Internal Design | Universal Mounting |
| Ball Material | Steel |
| Origin | Single Row Angular Contact |
| Preload Level | None |
| Contact Angle | 40° |
| Snap Ring | No Snap Ring |
| Precision Level | Standard (ABEC 1) |
| Material | Steel |
| O.D. | 160 mm |
| Inner Ring Width | 30 mm |
| Cage Type | Metal |
| icNumber | 7695858 |
| Overall Width | 1.181 in, 30 mm |
| Filling Slot | No |
| Rolling Element Material | Steel |
| Bearing Material | Steel |
| Fillet Radius Cone | 0.079 in, 2.01 mm |
| No. in Set | Single Bearing |
| Bore Type | Round Bore |
| Precision | Standard |
| Radial Internal Clearance | C3 |
| O.D. Type | Straight |
| Universally (Flush) Ground | Yes |
| Relubricatable | No |
| Capacity | Standard Capacity |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Dynamic Load Rating | 27000 lbf |
| Static Load Rating [Max] | 21200 lbf |
| Outer Ring Width | 30 mm |
| Rolling Element | Ball |
| Precision Class | ISO P0 |
| I.D. | 90 mm |
| Rows of Balls | Single |
| Closure Type | Open |
| Fillet Radius | 0.079 in |
| Seal Material | None |
| Seal Type | Unsealed |
| Weight | 5.806 LB |
| EAN or UPC | 87796068421 |
