Skip to content Skip to navigation menu
Single Row Cylindrical Bore Angular Contact Ball Bearing

7315PJDU

Single Row Cylindrical Bore Angular Contact Ball Bearing
Item #101174739
Single Row Cylindrical Bore Angular Contact Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options

features

  • MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
  • 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
  • 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
  • ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
  • 7300-PJ and PJD Series bearings are used for very heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Temperature Range [Max] 450 °F
Capacity Standard Capacity
Origin Single Row Angular Contact
Bearing Type Unmounted, Angular Contact
Precision Level Standard (ABEC 1)
Static Load Rating [Max] 25600 lbf
Bearing Class Normal / P0
Limiting Speed - Grease 3900 rpm
Radial Internal Clearance Normal
Inch/Metric Metric
I.D. 2.95 in, 75 mm
Material Bearing Steel
Lubricant Oil Preservative
Limiting Speed - Oil 5000 rpm
O.D. Type Cylindrical
Ball Material Steel
Width 1.46 in, 37 mm
No. of Rows Single
Static Load Rating 106 kN
No. in Set Single Bearing
Contact Angle 40 Degree
Seal Material None
Radial Internal Clearance Specification Normal Clearance
Element Material Bearing Steel
Internal Design Universal Mounting
Locking Device No Locking Device
Seal Type Unsealed
Row Type 1
No. of Bearings 1
Dynamic Load Rating 133 kN
Preload Level Light
Cage Type Metal
Snap Ring No Snap Ring
Precision Standard
Enclosure Open
Bore Type Cylindrical
Flush Ground Yes
Duplex Type Single
Rows of Balls Single
Cage Sheet Metal
Precision Rating ABEC 1
Outer Ring Width 1.46 in, 37 mm
Ring Type Solid Inner Ring and Solid Outer Ring
O.D. 6.3 in, 160 mm
Inner Ring Width 1.46 in, 37 mm
Rolling Element Ball
Series 7300PJ
Fillet Radius 2 mm
icNumber 7695820
Cage Material Brass
Weight 7.055 LB
EAN or UPC 97741017923
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison