Find a Service Center
Alternate Products
- 2.4375" Shaft, 4.125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Mounted Unit Duty | Heavy-Duty |
| Insert Type | Steel Insert |
| Seal Type | Contact Seals |
| Base Width | 4 in |
| Bearing Design | Non-Expansion |
| Housing Material | Cast Iron |
| Housing Construction | 1 Piece |
| Bearing Insert | GN207KRRB |
| Shaft Dia. | 2.4375 in |
| Locking Device | Eccentric Locking Collar |
| Bolt Hole Length | 1 3/8 in |
| Lubrication | Relubricatable |
| Bolt Holes | 2 |
| Bolt Hole Spacing | 11 1/4 in |
| Base Height | 1 1/2 in |
| Pillow Block Type | Thru-Bolt |
| Inch/Metric | Inch Bore |
| Bolt Hole Width | 7/8 in |
| Base Length | 13 3/4 in |
| Bearing Type | Ball Bearing |
| End Type | Open End |
| Collar No. | SN207K |
| Weight | 28.25 LB |
| EAN or UPC | 87796061682 |
